OptiMax Starter Kit and HFCal
OptiMax 1001 HFCal是一种反应量热仪，适用于快速、高效地进行工艺表征和放大生产安全性研究。
物料号: 511628301
亮点
规格
规格 - OptiMax Starter Kit and HFCal
| 重量 | 35 kg |
| 操作体积 | 150 mL – 1,000 mL |
| 外形尺寸 (高x宽x深) | 78 cm x 39 cm x 42 cm |
| 温度范围 | -40 °C – 180 °C |
| 后/前灯 | 是/是 |
| 热传递精确性 | 通常为 +/- 3% |
| 比热准确性和精确性 | 通常为 +/-10% |
| 热流准确性 | 基于 qr_hf 与 qc、以及∫qr_hf 与 ∫ qc 之间的比较 等温条件： ± 3 % 至 5 % 非等温条件： ± 5 % 至 10% |
| 量热法类型 | 热流 |
| 材料 | OptiMax入门套件（51162830）和OptiMax HFCal升级套件（30050150） |
| 温度模式 | Tj模式，Tr模式，蒸馏模式，结晶模式 |
| 升温/降温 | ≤ +/- 0.05 W -25° 至 160°，以 qr 的标准偏差测量 |
| 电源要求 | 100-240 VAC, 50/60Hz |
文件
单页样本
Datasheets for EasyMax and OptiMax HFCal models include technical specifications and configuration options.
产品样本
查看化学合成反应器、工作站和附件的完整目录。找到您的实验室所需的东西！
更多产品资讯
Guide on how to operate your OptiMax chemical synthesis workstation.
METTLER TOLEDO provides a range of value-added service options to help ensure instrument uptime, provide quality results, and ensure regulatory compli...
附件
耗材
软件
More Information
| Thermostat | ||
| Heating | Electrical | |
| Cooling | Peltier | |
| Cooling Performance | 0°C 35 W 20°C 65 W 40°C 95 W | |
| Temperature Range | -40°C to 180°C (jacket temperature) | |
| Control Modes | isothermal and isoperibolic, constant or ramp, reflux, distillation & crystallization | |
| Stirring | 30 rpm to 1200 rpm | |
| Dimensions | Thermostat: 388 mm x 414 mm x 539 mm | |
| Power Supply | 100 V to 240 V AC, 50 Hz to 60 Hz, 1300 VA | |
| Operation | iControl software for calorimetric applications Graphical touchscreen and/or iControl Software | |
| Reactors | ||
| Type | Single piece or two piece (with bottom drain valve) | |
| Volume | 1000 mL | |
| Pressure | 50 mbar to 1 bar | |
| Material | Duran® glass | |
| Stirrer | Pitch-blade (glass, Alloy 22) Anchor (glass, Alloy 22) Half-moon (PTFE for single piece reactor) | |
| Calorimetry | ||
| Type | Heat Flow | |
| Calibration Heater | Max. 20 W | |
| Precision Heat Transfer | Typically ± 3% | |
| Accuracy and Precision Specific Heat | Typically ± 10% | |
| Accuracy Heat Flow | Typically ± 3% to 5%, under isothermal conditions Typically ± 5% to 10%, under non-isothermal conditions | |
| Sensitivity | ≤0.1 W measured as standard deviation of qr under steady state conditions. Peak-to-peak noise is ≤ approximately 0.4 W. | |
| HFCal Module | ||
| Power and Data Interface | Direct connection to CAN interface of standard OptiMax, no additional power supply or PC connection required | |
| Data Logging | Via iControl Software | |
| Dimensions | 120 mm x 40 mm x 170 mm | |
| Software | iControl 5.2 or higher required, HFCal license |