OptiMax Starter Kit and HFCal
N. di materiale: 511628301
Specifiche
Specifiche - OptiMax Starter Kit and HFCal
| Peso | 35 kg |
| Volume operativo | 150 mL – 1.000 mL |
| Dimensioni (AxLxP) | 78 cm x 39 cm x 42 cm |
| Intervallo di temperatura | -40 °C – 180 °C |
| Luce anteriore / posteriore | Sì / Sì |
| Precisione del passaggio di calore | Typically +/- 3% |
| Precisione e accuratezza del calore specifico | Typically +/-10% |
| Accuratezza del flusso di calore | Basato sul confronto di qr_hf con qc risp. ∫qr_hf con ∫ qc Condizioni isotermiche: da ±3% a 5% Condizioni non isotermiche: da ±5% a 10% |
| Tipo calorimetria | Flusso di calore |
| Materiale | OptiMax Starter Kit (51162830) and Upgrade Kit OptiMax HFCal (30050150) |
| Modi temperatura | Controllo camicia, controllo miscela di reazione, controllo distillazione, controllo cristallizzazione |
| Riscaldamento / Raffreddamento | Termostato a stato solido |
| Requisiti di alimentazione | 100–240 V CA, 50/60 Hz |
Documenti
Schede tecniche
Datasheets for EasyMax and OptiMax HFCal models include technical specifications and configuration options.
Brochures Prodotto
Visualizza il catalogo completo di reattori di sintesi chimica, workstation e accessori. Trova ciò di cui hai bisogno per il tuo laboratorio!
Informazione Prodotto estesa
Guide on how to operate your OptiMax chemical synthesis workstation.
METTLER TOLEDO provides a range of value-added service options to help ensure instrument uptime, provide quality results, and ensure regulatory compli...
Accessori
Consumabili
Software
More Information
| Thermostat | ||
| Heating | Electrical | |
| Cooling | Peltier | |
| Cooling Performance | 0°C 35 W 20°C 65 W 40°C 95 W | |
| Temperature Range | -40°C to 180°C (jacket temperature) | |
| Control Modes | isothermal and isoperibolic, constant or ramp, reflux, distillation & crystallization | |
| Stirring | 30 rpm to 1200 rpm | |
| Dimensions | Thermostat: 388 mm x 414 mm x 539 mm | |
| Power Supply | 100 V to 240 V AC, 50 Hz to 60 Hz, 1300 VA | |
| Operation | iControl software for calorimetric applications Graphical touchscreen and/or iControl Software | |
| Reactors | ||
| Type | Single piece or two piece (with bottom drain valve) | |
| Volume | 1000 mL | |
| Pressure | 50 mbar to 1 bar | |
| Material | Duran® glass | |
| Stirrer | Pitch-blade (glass, Alloy 22) Anchor (glass, Alloy 22) Half-moon (PTFE for single piece reactor) | |
| Calorimetry | ||
| Type | Heat Flow | |
| Calibration Heater | Max. 20 W | |
| Precision Heat Transfer | Typically ± 3% | |
| Accuracy and Precision Specific Heat | Typically ± 10% | |
| Accuracy Heat Flow | Typically ± 3% to 5%, under isothermal conditions Typically ± 5% to 10%, under non-isothermal conditions | |
| Sensitivity | ≤0.1 W measured as standard deviation of qr under steady state conditions. Peak-to-peak noise is ≤ approximately 0.4 W. | |
| HFCal Module | ||
| Power and Data Interface | Direct connection to CAN interface of standard OptiMax, no additional power supply or PC connection required | |
| Data Logging | Via iControl Software | |
| Dimensions | 120 mm x 40 mm x 170 mm | |
| Software | iControl 5.2 or higher required, HFCal license |