DO Sensor InPro6860i/12/120/mA/HD
The InPro 6860i/12/120/mA/HD is an optical dissolved oxygen sensor with a mechanically modified hydrophilic surface. Combined with its tilted design, it prevents bubble accumulation, creating a highly stable measurement signal.
Material No.: 30449705
Highlights
Specifications
Specifications - DO Sensor InPro6860i/12/120/mA/HD
| Measurement Parameter | Oxygen |
| Measurement Technology | Optical fluorescence quenching |
| Accuracy | ± (1 % of the reading + 8 ppb) |
| Response Time | T98 = < 90 s |
| Primary Media/Application | Pharmaceutical/Life Science Production |
| ISM (Digital) or Analog | ISM (Digital) |
| Anti-Bubble Design | Yes |
| Wetted Metallic Material | 316L stainless steel |
| Surface Roughnes of Wetted Material | N5/Ra16 (Ra=0.4μm/16μin) |
| Sensor Diameter | 12 mm |
| O-Ring Material | EPDM |
| Power | 25 V DC 0.1 A |
| Process Connection | Pg 13.5 |
| Sensor Length | 120 mm |
| Wetted membrane material | PTFE |
| Connector Design | Straight |
| Model Family | InPro 6860i |
| Autoclavable/Sterilizable | Yes |
| CIP resistant | Yes |
| Measuring Temp. Range | 41 °F – 140 °F (5 °C – 60 °C) |
| Mechanical Temp. Range | -4 °F – 284 °F (-20 °C – 140 °C) |
| Operating Pressure (Bar) | 0.2–6 Bar |
| Operating Pressure (PSI) | 0–87 PSI |
| Design Pressure | 87 psi (6 bar) |
| Analog Integration | 4/20 mA HART active output |
| Digital Integration | RS485 - ISM® and MODBUS RTU |
| Cable Connector | VP6 / VP8 (analog / digital) |
| Hygienic/Biocompatibility Approvals | FDA/USP Class 7 |
| Hazardous Area Approvals | ATEX/IECEx: II 1/2G Ex ia/ib HC T6 Ga/Gb II1/2D Ex ia/ib nie T83 °C Da/Db |
| Certificates & Approvals | Quality certificate, Material certificate 3.1, Surface finish certificate, ATEX/IECEx certificate, FDA/USP Class IV |
| Measurement Range | 0...saturation |
| Sterilizable/Autoclavable | Yes |
Watch the video on the Anti-Bubble OptoCap
Documentation
Datasheets
Continuous dissolved oxygen (DO) measurement is critical during fermentation and cell culture. The InPro 6860 i HD Anti-Bubble™ Oxygen Sensor is mecha...
Technical Specifications
Manuals
METTLER TOLEDO optical O2 sensors are intended solely for inline measurement of the oxygen partial pressure, as described in this instruction manual.
White Papers
This white paper provides educational content and shares practical expertise on corrosion and corrosion reduction in the chemical industry. It explain...
Application Notes
Case Studies
This case study describes how Ajinomoto needed more dependable pH and DO sensors, plus less sensor maintenance, they turned to METTLER TOLEDO. Now, in...
Novozymes is the world leader in the production of enzymes and has a global market share of more than 30%. Read in the case study how for Novozymes, o...
Accessories
Digital Sensor Integration
The M100 Sensor Mount (SM) is a single-channel transmitter for connecting ISM optical dissolved oxygen sensors to a biocontroller. The Bluetooth 4.0 interface is compatible with the PC-based and mobile versions of iSense software.
Material No.: 30365367
